For technical fractions with narrower boiling ranges (open points) the absolute
average deviation was found to be about 8 [degrees]C when using the corrected thermocouple temperatures, and about 12 [degrees]C when using the uncorrected thermocouple temperatures.
In their clinical study, Alolabi and associates reported that the
average deviation of the CoR for HHR was 3.8 mm [+ or -] 2.1 mm.
An
average deviation of 7% was observed which could be due to errors caused by the placement and calibration of the sensors.
Once we had created the employment vulnerability indicators, we were able to determine the
average deviation of each indicator, per counties and Bucharest; we applied the scoring method using a scale from 0 up to 3 and an equal step (maximum value of the indicator divided by 4).
Please note that extensive testing of the model was done for all the dependable parameters, with ten separate prediction values and 20 test runs for all the measured values in order to ensure the most accurate average value along with the
average deviation error.
Applying the factor Be the
average deviation from the FE results for favourable soil conditions is [DELTA]T/H [approximately equal to] 9%, and for unfavourable ground [DELTA]T/H [approximately equal to] 12.5%.
The
average deviation 8 is the quotient of the sum of absolute value of the minimum nearest distance calculated between the points and the interpreted gully edge line divided by the total number of points (formula (4)), which is used to assess overall positional accuracy of the interpreted gully edge line: